Plastite® 60-1 Fasteners

Screws For Plastic And Other Low Density Materials

Plastite trilobular thread rolling screws are designed for high performance fastening in a wide range of thermoplastics. The 60° profile on the Type 60-1 screw penetrates deeply into the work piece, absorbing higher torques without stripping and resisting pullout forces. As threads are formed, the plastic material recovers and fills in around the tri-lobular threads, providing resistance to loosening and assuring a secure assembly.

tf14-1

Recommended Pilot Hole Sizes For 60-1 Plastite Screws

SCREW
SIZE
“C” MAX. “C” MIN. “D” MAX. “D” MIN . MINIMUM
OUT OF
ROUND
RECOMMENDED
PILOT HOLE SIZES FOR
SOFT, DUCTILE MATERIALS
RECOMMENDED
PILOT HOLE SIZES FOR BRITTLE
MATERIALS
2-28 0.092 0.086 0.089 0.083 0.002 0.076 0.08
4-20 0.127 0.121 0.123 0.117 0.002 0.1 0.106
6-19 0.147 0.141 0.143 0.137 0.003 0.122 0.128
8-16 0.185 0.179 0.179 0.173 0.004 0.149 0.158
10-14 0.212 0.206 0.208 0.202 0.004 0.175 0.185
1/14-10 0.276 0.27 0.268 0.262 0.006 0.224 0.24
5/16-9 0.345 0.335 0.335 0.325 0.006 0.286 0.303

Plastite® 48-2 Fasteners

Screws For Plastic And Other Low Density Materials

This trilobular thread rolling screw also has twin lead, sharper (48°) threads for minimal displacement of materials and a low driving torque requirement.Cracking of plastic and boss breakage is greatly reduced.This version of the Plastite is recommended where high torques are required.

tf14-2

Recommended Pilot Hole Sizes For 48-2 Plastite Screws

SCREW
SIZE
“C” MAX. “C” MIN. “D” MAX. “D” MIN . MINIMUM
OUT OF
ROUND
RECOMMENDED
PILOT HOLE SIZES FOR
SOFT, DUCTILE MATERIALS
RECOMMENDED
PILOT HOLE SIZES FOR BRITTLE
MATERIALS
2-28 0.092 0.086 0.089 0.083 0.002 0.076 0.08
4-20 0.127 0.121 0.123 0.117 0.002 0.1 0.106
6-19 0.147 0.141 0.143 0.137 0.003 0.122 0.128
8-16 0.185 0.179 0.179 0.173 0.004 0.149 0.158
10- 14 0.212 0.206 0.208 0.202 0.004 0.175 0.185
1/14-10 0.276 0.27 0.268 0.262 0.006 0.224 0.24
5/16-9 0.345 0.335 0.335 0.325 0.006 0.286 0.303

Note: Plastite® is a registered trademark of Research Engineering and Manufacturing Incorporated.