tf30-1Keps® Preassembled Nut And Washer Products

All of the inherent design, quality and economic advantages of preassembled small parts are provided by Keps preassembled nuts and washers, another ITW Shakeproof invention. Keps fasteners can be hopper fed to automatic drivers for increased assembly efficiencies. The free-spinning washer permits full locking action of the Shakeproof tapered, twisted tooth lock washer.

Material
Steel Nut: C1008-C1020
Steel Washer: C1050
Stainless Steel Nut: 302/304 SS
Stainless Steel Washer: 420 SS
Other materials must be specified at time of quote.
Finish
Standard Finish unless otherwise specified.
Trivalent (CR3) zinc clear chromate 0.0002″ min + bake

External Lockwasher Keps

SIZE WCL
PRODUCT NUMBER
ACROSS FLATS ACROSS
CORNERS (MIN.)
NUT
THICKNESS
WASHER O.D. WASHER
MATERIAL
THICKNESS
4-40 K0440 .250 – .241 .289 – .275 .098 – .087 .286 – .273 .014 – .012
6-32 K0632 SM/P .250 – .241 .289 – .275 .098 – .087 .287 – .277 .014 – .012
6-32 K0632 .312 – .302 .361 – .344 .114 – .102 .348 – .338 .019 – .016
8-32 K0832 .344 – .332 .397 – .378 .130 – .117 .381 – .370 .021 – .018
10-24 K1024 .375 – .362 .433 – .413 .130 – .117 .411 – .395 .023 – .018
10-32 K1032 .375 – .362 .433 – .413 .130 – .117 .411 – .395 .023 – .018
12-24 K1224 .438 – .423 .505 – .482 .161 – .148 .506 – .494 .026 – .022
1/4-20 K2520 .438 – .423 .505 – .482 .193 – .178 .506 – .494 .026 – .022
1/4-28 K2528 .438 – .423 .505 – .482 .193 – .178 .506 – .494 .026 – .022
5/16-18 K5618 .500 – .489 .577 – .557 .273 – .258 .592 – .573 .031 – .027
3/8-16 K3716 .562 – .551 .650 – .628 .337 – .320 .665 – .650 .031 – .027

Dimensions In Inches
Note: SM/P = Small Pattern Nut

Conical Washer Keps

SIZE WCL
PRODUCT NUMBER
ACROSS FLATS ACROSS
CORNERS (MIN.)
NUT
THICKNESS
WASHER O.D. WASHER
MATERIAL
THICKNESS
4-40 CK0440 .250 – .241 .289 – .275 .098 – .087 .333 – .323 .014 – .012
6-32 CK0632 .312 – .302 .361 – .344 .098 – .087 .333 – .323 .019 – .016
8-32 CK0832 .344 – .332 .397 – .378 .130 – .117 .381 – .370 .021 – .018
10-32 CK1032 .375 – .362 .433 – .413 .130 – .117 .411 – .395 .023 – .018
1/4-20 CK2520 .438 – .423 .505 – .482 .130 – .117 .506 – .494 .026 – .022
1/4-20 CK2520-03 .437 – .428 .505 – .482 .193 – .176 .625 .042 – .051
5/16-18 CK3118 .500 – .489 .577 – .557 .195 – .180 .569 – .555 .031 – .027
5/16-18 CK3118-03 .500 Ref .560 min .265 Ref .750 Ref .062 Ref
3/8-16 CK3716-01 .562 – .551 .628 min .333 – .324 1.004 – .990 .083 – .074
1/2-13 CK5013 .736 – .750 .840 – .866 .430 – .447 1.235 – 1.265 .088 – .098

Other Washer O.D.’s available to quote upon request

Dimensions In Inches
Note: All Steel Keps® come with standard Zinc Finish. Other finishes are available.
Metric sizes and Stainless Steel Keps® are available. Please inquire with WCL.
Keps is a registered trademarks of Illinois Tool Works Incorporated.

Metric Conical Washer Keps

SIZE (mm) WCL
PRODUCT NUMBER
ACROSS FLATS NUT
THICKNESS
WASHER O.D. WASHER
MATERIAL
THICKNESS
4 CKM4 7 3.2 10 0.5
5 CKM5 8 4 12 0.8
6 CKM6 10 5 14 1
8 CKM8 13 6.5 18 1.4
10 CKM10 17 8 22 1.6
12 CKM12 19 10 25.5 2.4