T-1 and T-1¾
Designed for mounting LEDs, resistors, capacitors, transistors and diodes on printed circuit boards. Eliminates or controls problems of mounting passive components on PC boards, including height control, lead shorting and removal of soldering residue.
PC Standoff design has a cylindrical plastic body, dual-tapered lead entry ports, center barrier for lead separation and raised clearance pads for proper cleansing of the PCB. The cylindrical body protects the leads from damage by outside agencies while its center barrier prevents the possible shorting of the component leads.
Standoff has dual tapered entry ports on .100 inch centers. This permits installation of varied shapes of LEDs and other opto-components. Component elevation is simplified, with mounts available in heights varying from .100 to .990 in increments of .010 of an inch.
|LENGTH = XXX||BARRIER = H|
|.120″ TO .240″||.08″|
|.250″ TO .360″||.20″|
|.370″ TO .480″||.33″|
|.490″ TO .640″||.45″|
|.650″ TO .740″||.58″|
|.750″ TO .990″||.70″|
SPECIFICATIONS MATERIAL: Molded From U.L. Rated 94V-2 Nylon (Natural).
DESIGN: Has center barrier for lead separation. Tapered entry holes simplify lead insertion. Raised pads for board cleaning.
MOUNTING: Passive components, LEDs resistors, capacitors, diodes. Standoffs vary in height from .100 minimum to .990 inch maximum increments of .010 inch.
|PART # 275 – (Series with ID .133″) or PART # 175 – (Series with ID .155″)
STD XXX LENGTH IN INCHES