Skip to content
Call Toll Free: 800.331.3816

AS9100 - ISO9001    Check us out on Facebook or on Linkedin!

Top Menu
Search:
Search
WCL Company
A Fastener Company
WCL Company
    • About WCL
    • Contact / RFQ
    Mobile Menu

    Call Toll Free: 800.331.3816

    AS9100 - ISO9001

    Check us out on Facebook!

    Alexa Gaxiola

    You are here:
    1. Home
    2. Teammate
    3. Alexa Gaxiola
    WCL Company
    © WCL Company – All Rights Reserved
    • Home
    • Products
      • Plastic Components
        • Plastic Bearings
          • Flanged Bearings with Locking Notch
          • Flanged Bearings
          • Snap-In Bearings
        • Plastic Bumpers
          • Self-Adhesive Bumpers
          • Snap-In Stem Bumpers
            • Standard Snap-In Stem Bumpers
            • Double Stem Bumpers
            • Flat Head Snap-In Stem Bumpers
            • Stem Bumpers – Domed Head & Domed Head Split
            • Stem Bumpers – Button, Coved & Wedge
            • Recessed Bumpers – Tapered & Round
            • Recessed Bumpers – Coved & Round
          • Stacking Chair Plugs
        • Electrical & Electronic Components
          • Printed Circuit Board Supports & Spacers
            • Supports & Spacers – Snap-In
            • Supports – Dual Locking
            • Supports – Locking / Releaseable
            • Support Posts
            • Standoffs – Reverse Edgemount
            • Standoffs – Threaded
            • Spacers – Self-Retaining / Stacking
          • LED Holders & Light Standoffs
            • LED Holders
            • Standoff LED Holders
          • Grounding Clips – Metal
            • Stranded Wire Grounding Clips
            • Solid Conductor Grounding Clips
            • Grounding Support – Printed Circuit Board
          • Nylon Transistor Insulators
          • Card Guides
        • Furniture Components
          • Bumpers
          • Caps, Ferrules & Tips
            • Caps
            • Ferrules & Tips
            • Dip Molded Vinyl Caps
          • Chair Hardware
            • Push in Fasteners
            • Chair Paddles
            • Caster Sockets
            • Seat Post Bushings
          • Door & Access Panel Hardware
            • Tree-Lok Fasteners
            • Push/Pull Knob Rivets – T-Type
            • Door Catch with Metal Strike
            • Door Guide
          • Shutter & Hinge Pins
          • Drawer Hardware
            • Drawer Pulls
            • Drawer Guides
            • Drawer Glides
            • Divider Supports
          • Insert Glides
            • Round Insert Glides
            • Square Insert Glides
            • Rectangular Insert Glides
            • Rocker Base Insert Glides
            • Ball Insert Glides
            • Angle Glides
            • Grip Glides
            • Threaded Insert Glides
            • Snap-On Glides & Caps
            • Carpet Gripper Glides
            • Adjustable Insert Glides
          • Grommets
            • Leg Leveling Grommets
            • Wire Management Grommets
            • Paper Feed Grommets
            • Umbrella Table Grommets & Plugs
            • Flexible Grommets
          • Feet & Rollers
            • Grommet Feet
            • Stick-On Feet
            • Saddle Feet
            • Stand-Off Feet
            • Screw-On Feet
            • Rollers
          • Premium Handwheels
            • Male (Type 1), Female (Type 1) & Threaded-Right through (Type 2)
            • Male Standard & Female Standard
            • Female Lightweight Handwheels
          • Protective & Decorative Fastener Caps
            • Uniscrew Protective Caps
            • Bolt & Nut Protection Fastener Caps
            • Cross-Head Screw Protective Fastener Caps
            • Rivet Protective Fastener Caps
            • Low Profile Decorative Fastener Caps
            • High Profile Decorative Caps
          • Reducers – Adjusters – Collars & Connectors
            • Reducers
            • Tube Adjusters
            • Split Collars
            • Round-To-Round Tube Connectors
            • Square-To-Round Tube Connectors
            • Straight Tube Connectors
            • Angled Tube Connectors
            • Multi-Way Connectors
          • Shelf Hardware
            • Heavy Duty Shelf Supports
            • Light Duty Shelf Supports
            • Glass Shelf Supports
            • Glass Clips
            • Retainer Clips
            • Plastic Dowel Pins
            • Closet Pole Hangers
        • Panel Fasteners
          • Panel Fasteners – Access
            • Tree-Lok Fastener
            • Strike & Latch
          • Panel Fasteners – Ribbed Shank
            • Christmas Tree® Clips – Single Head
            • Christmas Tree® Clips – Double Head
            • Christmas Tree® Clips – Quarter Turn
            • Christmas Tree® Clips – Double End
            • Pine Tree Clips® – Removable, Non-Reusable & Reusable
            • Ribbed Clips – Nylon, Double Ended
          • Panel Fasteners – Compressible Shank
            • Canoe® Clips
            • Stalok® Fasteners
            • Nylon Push-in Clips
            • Nylon Arrow Clips – Hollow Shank
          • Panel Fasteners – Screw Grommets
            • Plasti-Grommets™
            • Encloz® Grommets
            • Encloz® Reverse Grommets
            • Round Hole Grommets
          • Panel Fasteners – Plastic Rivets
            • Plasti-Rivets® – Three & Four Prong (Non-Driven)
            • Plasti-Rivets® – Two Prong (Pre-Driven)
            • Tuflok®
            • Micro-Tuflok®
            • ScrewType Tuflok®
            • R-Lok®
            • R-Tite
            • Removeable Rivets
            • Push/Pull Rivets – H-Type
            • Push/Pull Knob Rivets – T-Type
            • Push/Pull Rivets – P-Type
            • Ratchet Rivets
            • Snap Rivets
            • Nylon – Solid Rivets
            • Dowel Pins
        • Hole Plugs
          • Plasti-Plugs™
          • Locking Hole Plugs
          • Locking Vent Plugs
          • Stacking Chair Plugs
        • Spacers & Shoulder Washers
          • Self-Retaining Spacers
          • Nylon Shoulder Washers
          • Nylon Standard Spacers
          • Nylon Special Spacers
          • Nylon Tapped Round Spacers
          • Nylon Hex Spacers
          • Nylon Hex Tapped Spacers
          • More Spacers, Washers & Bushings
          • Nylon Flanged Bearings With Locking Notch
          • Nylon Flanged Bearings
          • Polyliner Snap-in Bearings
          • Nylon Flat Washers
          • Finishing & Retaining Washers
        • Threaded Nylon Fasteners
          • Machine Screws
            • Nylon Machine Screws
            • Available Diameters & Lengths – Nylon Machine Screws
            • Nylon Hex Head Screws
            • Flat Head Slotted Nylon Machine Screws
            • Oval Head Nylon Machine Screws
            • Nylon Carriage Bolts
            • Nylon Thumb Screws
            • Nylon Sloted Machine Set Screws
            • Nylon Socket Head Cap Screws
            • Nylon Button Head Socket Screws
            • Cheese Head, Flat & Pan Nylon Metric Screws
            • Phillips Fillister / Slotted Set Grub / Nylon Metric
          • Nuts
            • Hex – Cap – Wing and Locknuts
            • Nylon Thumb & Hex Jam Nuts
            • Nylon Expansion Nuts
            • Nylon Metric Hex Nuts
            • Kwik-Nuts
        • Wire Management
          • Nylon Clips For Wire & Cable Routing
            • Adhesive Backed Clips
            • Snap-in Clips
            • Top Entry Snap-in Clips
            • Side Entry Snap-in Clips
            • Clip-on Clips
            • Screw Down Clips
            • Adjustable Straps
          • Nylon Clips for Tubes
          • Strain Relief Grommets
          • Cable Ties
        • General Guide to Plastics
      • Threaded Fasteners
        • Threaded Fasteners Introduction
        • Screw and Washer Assemblies (SEMS Screws)
          • External Tooth and Internal Washer Sems Assemblies
          • Square Cone® Washer (Square Dome) Sems Assemblies – Specifications
          • Square Cone (Square Dome) Washer Sems Assemblies – Stocked Standards
          • Terminal Sems Assemblies
          • Spak Washer Sems Assemblies
          • Other Sems Screw And Washer Assemblies
        • Thread Forming and Thread Cutting Fasteners for Standard Panel And Component Thickness
          • Tap/R® Thread Roll Forming Screws
          • TAPTITE® I and TAPTITE® II Thread Forming Screws
          • Thread Cutting Screws
        • Tapping Screws for Thin Gage Metal
          • Cyclone® Screws
          • GX Self-Extruding Screws
          • Sheet Metal Tapping Screws
        • Screws for Plastics and Other Low Density Materials
          • Plastite® Fasteners
          • Imported Trilobular Screws for Plastics
          • Hi-Lo® Fasteners
          • Hi-Lo® Plus™ Fasteners
          • Hi-lo® & Hi-LoPlus™ Fastener Comparisons
          • Hi-Lo® & Hi-Lo Plus™ Fasteners – Stocked Standards
        • Custom Multi-die Cold Headed Parts
        • Machine & Sheet Metal Screws
        • Nut and Washer Assemblies – Keps® Pre-Assembled Nuts & Washers
        • Stamped Nuts
          • Cone Type (Spiracone™ ) & Twin Prong Spring Nuts
          • Rectangular & Round Flat Nuts
          • J Nuts
          • U Nuts
          • Wide Range Panel & Double Nuts
          • Rectangular & Round Push-On Nuts
          • U Clips
          • Stamped Nut Part Number Cross Reference Listings
        • Nylon Threaded Fasteners
          • Nylon Machine Screws
          • Nylon Nuts
          • Nylon Tapped Spacers
        • Torque Washers for Carriage Bolts
      • Spring Washers
        • Spring Washers General Description
        • Wave Washers
          • Single Wave Washers (Crescent)
          • Single Wave Washers (Flat Rim)
          • Three Wave Washers
          • Four Wave Washers
          • Style 10 Spring Washers
          • Style 12 Spring Washers
          • Style 14 Spring Washers
          • Finger Washers
        • Conical Washers
          • Conical Washers
          • Conical Washers – Tooth Periphery
          • Ramp Conical™ Washers
          • Ramp Conical™ Washers – Tooth Periphery
          • Square Cone® Washers (Square Dome)
          • Disc Spring Washers
        • Belleville Disc Spring Washers
        • Shaft Retainers
        • Push-On Nuts
          • Round Push-on Nuts
          • Rectangular Push-on Nuts
        • Wire Forms & Precision Springs
      • Lock Washers
        • Lock Washer Material & Finish Codes
        • Helical Spring Washers
          • General Helical Spring Split Lock Washer Information
          • Regular Helical Spring Split Lock Washers
          • Regular Helical Spring Split Lock Washers (Mil-Spec)
          • Heavy Helical Spring Split Lock Washers
          • Heavy Helical Spring Split Lock Washers (Mil-Spec)
          • Extra Duty (Extra Heavy) Helical Spring Split Lock Washers
          • Extra Duty (Extra Heavy) Helical Spring Split Lock Washers (Mil-Spec)
          • Hi-Collar Helical Spring Split Lock Washers
          • Light Helical Spring Split Lock Washers
          • High Alloy Helical Spring Split Lock Washers
          • Double Coil Helical Spring Split Lock Washers
          • Metric Helical Spring Split Lock Washers
          • National Track Washers
        • Square Conical Lock Washers
        • Toothed Lock Washers
          • General Toothed Lock Washer Information
          • External Type Lock Washers (Standard & Mil-Spec)
          • Internal Type Lock Washers (Standard & Mil-Spec)
          • Heavy Duty Internal Type Lock Washers (Standard & Mil-Spec)
          • Countersunk Type Lock Washers (Standard & Mil-Spec)
          • External-Internal Type Lock Washers (Standard & Mil-Spec)
          • Pyramidal Type Lock Washers
          • Dome Type Lock Washers
          • Dished Type Lock Washers
          • Wide Rim Type Lock Washers
          • Narrow Rim Type Lock Washers
          • Alternate Internal Type Lock Washers
          • Pipe Lock Washers
        • Tooth Type Solder Locking Terminals
        • Shaft Retainers
        • Torque Washers for Carriage Bolts
      • Flat Washers
        • Washer Facts
        • Flat Washer Reference Specifications
        • Materials & Platings
        • High Strength – Heat Treated, Plain & Countersunk Washers Washers
        • Metallic Flat Washers
        • Metallic Torque Washers
        • Metallic Special & Flat Washers
        • Nylon/Plastic/Rubber Flat Washers
        • Insulating Fibre Flat Washers
        • Phenolic Flat Washers
        • Thermoplastic Nylon Flat Washers & Spacers
        • Thermoplastic PTFE/polytetrafluoroethene Flat Washers
        • Non-Metallic Shoulder Washers
        • Nylon Standard Spacers
        • Plating & Material Specifications
      • Shaft Retainers
        • Retainer Options & Functions
        • Standard Internal Retainers & Style A Retainers
        • Internal Tooth Strip Form Retainers
        • Application Tools
        • Bearing Retainers
        • Push-On Bolt Retainers
        • Internal Tooth – Wide Rim Retainers
        • External Tooth Retainers
        • Solid I.D. Retainers
      • Belleville Disc Springs
        • Belleville Disc Washer Description, Design Considerations & Load/Deflection Data
        • Belleville Disc Spring Washers
      • Mil-Spec Fasteners
    • About WCL
      • WCL Staff
        • WCL Staff Contact Form
        • WCL Photo Albums
      • WCL Quality and Purchase Order Provisions
      • WCL Company Shipping Instructions
      • WCL Mission Statement
      • WCL Sitemap
    • Contact / RFQ
    • Privacy Policy
    Footer Menu
    16730 East Johnson Dr. • P.O. Box 3588 • Industry, CA 91744
    Toll Free 800.331.3816 (US Only)  |   626.968.5523
    626.369.9805  |   info@nullwclco.com
    Go to Top