Plain Periphery
Recommended to prevent surface marring.
Recommended to prevent surface marring.
Toothed Periphery Type
Recommended to prevent shifting.
Recommended to prevent shifting.
- Use where force and rigidity are required when fastening in soft or thin material.
- Distributes load over wide area.
- Spans oversized or elongated holes.
- Internal teeth lock into bolt head or nut to prevent backoff.
Plain Periphery Type
| Nominal Washer Size |
Hole Dia. Min. | Hole Dia. Max. | Outside Dia. Min. | Outside Dia. Max. | Thickness | Height | WCL Part Number |
Cross Reference |
|---|---|---|---|---|---|---|---|---|
| 10 | 0.192 | 0.204 | 0.991 | 1.009 | 0.04 | .135 | DMPP-0190-16-01 | 4510-16-01 |
| 1/4 | 0.256 | 0.267 | 1.115 | 1.135 | 0.039 | .155 | DMPP-0250-18-01 | 4514-18-01 |
| 5/16 | 0.32 | 0.332 | 0.991 | 1.009 | 0.05 | .195 | DMPP-0312-16-01 | 4518-16-01 |
| 5/16 | 0.32 | 0.332 | 1.24 | 1.26 | 0.05 | .190 | DMPP-0312-20-01 | 4518-20-01 |
| 3/8 | 0.384 | 0.398 | 1.365 | 1.385 | 0.062 | .235 | DMPP-0375-22-01 | 4520-22-01 |
Toothed Periphery Type
| Nominal Washer Size |
Hole Dia. Min. | Hole Dia. Max. | Outside Dia. Min. | Outside Dia. Max. | Thickness | Height | WCL Part Number |
Cross Reference |
|---|---|---|---|---|---|---|---|---|
| 10 | 0.196 | 0.2 | 0.991 | 1.009 | 0.05 | .162 | DMTP-0190-16-01 | 4610-16-01 |
| 10 | 0.196 | 0.2 | 0.991 | 1.009 | 0.029 | .141 | DMTP-0190-16-02 | 4610-16-02 |
| 1/4 | 0.256 | 0.267 | 1.115 | 1.135 | 0.04 | .175 | DMTP-0250-18-01 | 4614-18-01 |
| 3/8 | 0.384 | 0.398 | 1.365 | 1.385 | 0.062 | .240 | DMTP-0375-22-01 | 4620-22-01 |
| 3/8 | 0.38 | 0.39 | 1.595 | 1.625 | 0.078 | .305 | DMTP-0375-26-01 | 4620-26-01 |
| 1/2 | 0.512 | 0.529 | 1.595 | 1.625 | 0.078 | .300 | DMTP-0500-26-01 | 4624-26-01 |
| 5/8 | 0.64 | 0.659 | 1.86 | 1.89 | 0.078 | .315 | DMTP-0625-30-01 | 4628-30-01 |