Rivet Nut Inserts

Rivet Nut Inserts		PDF LINK
NL RIB WALL LOW PROFILE HEAD SERIES
	Designed for use in punched or even hand drilled, out-of-round holes. Features a large diameter, low profile head and knurled counter bore. Offers the highest all around strength. Helps prevent the ingress of water and dirt. Can be installed after finish. Size from Metric4 to Metric12 ( Inch #6 to Inch 1/2)
NL-B CLOSED END RIB WALL LOW PROFILE HEAD SERIES
	Similar to the NL series but with a closed end. Thread area is enclosed eliminating leakage past the threads from either side of the application. Size from Metric4 to Metric10 ( Inch #6 to Inch 3/8)
NK RIB WALL MINIMIZED PROFILE HEAD SERIES
	Same as NL series but with a minimized head profile. Allows near flush installations with no need for special hole preparations such as countersinking or dimpling. Can be installed after finish. Size from Metric4 to Metric12 ( Inch #6 to Inch 1/2)
NK-B CLOSED END RIB WALL MINIMIZED PROFILE HEAD SERIES
	Similar to the NK series but with a closed end. Thread area is enclosed eliminating leakage past the threads from either side of the application. Size from Metric4 to Metric10 ( Inch #6 to Inch 3/8)
NH HALF HEX SHANK LOW PROFILE HEAD SERIES
	Features a hex body design. Generates the ultimate torque-to-turn resistance in application. Ideal when SPC and/or a prevailing torque thread lock is required, also useful where the parent material undergoes significant thermal expansion and contraction. Can be installed after finish. Size from Metric4 to Metric12 ( Inch #6 to Inch 1/2)
NH-B CLOSED END HALF HEX SHANK LOW PROFILE HEAD SERIES
	Similar to the NH series but with a closed end. Thread area is enclosed eliminating leakage past the threads from either side of the application. Size from Metric4 to Metric10 ( Inch #6 to Inch 3/8)
NO THIN WALL LOW PROFILE HEAD SERIES
	Features a low profile head design. Achieves flush installations with no need for countersink drilling or dimpling of the parent material. Can be installed after finish. Size from Metric4 to Metric10 ( Inch #6 to Inch 3/8)
NR RIVET NUT FLAT HEAD SERIES
	Designed for use in leg-leveling applications. Features a thicker head profile. Features a larger bearing surface, reinforce hole, preventing push through. Can be installed after finish. Size from Inch #6 to Inch 1/2
NS STRAIGHT SHANK SLOTTED BODY FLAT HEAD STRAIGHT SHANK SERIES
	Suitable for wide applications such as sheet metal, fiberglass and plastics. Slotted shanks split and become large flaps, which provide installation and working loads over a large area. With outstanding advantages of superb pull-out strength, wide grip range and exceptional torque and thread strength. Can be installed after finish. Size from Metric4 to Metric8 ( Inch #6 to Inch 5/16)
NS-P PRE BULBED SLOTTED BODY FLAT HEAD SHANK SERIES
	Similar to the NS series but with a Pre-Bulbed slotted body. Low installation load suitable for spin-spin type installation. Can be installed after finish. Size from Metric4 to Metric8 ( Inch #6 to Inch 5/16)
ND-M TRUE METRIC DOUBLE SHANK SERIES
	Features a larger bearing surface and reinforce hole. Can be installed after finish. Size from Metric4 to Metric10
ND-M-L TRUE METRIC DOUBLE SHANK SLIM HEAD SERIES
	Same as ND-M series but with a minimized head profile. Allows near flush installations with no need for special hole preparations such as countersink drilling or dimpling. Size from Metric4 to Metric10
NL-M TRUE METRIC RIB WALL SERIES
	Similar to ND-M but with a knurled counter bore. Improves torque-to-turn up to 50% compared with ND-M series. Can be installed after finish. Size from Metric4 to Metric12
NL-M-L TRUE METRIC RIB WALL SLIM HEAD SERIES
	Same as NL-M series but with a minimized head profile. Allows near flush installations with no need for special hole preparations such as countersink drilling or dimpling. Size from Metric4 to Metric10
NH-M TRUE METRIC HALF HEX SHANK SERIES
	Hexagonal body set with the Hexagonal part in the grip range. Extremely high Torque-to-Turn resistance, 200% higher than the ND-M series. Can be installed after finish. Size from Metric4 to Metric12
NH-M-L TRUE METRIC HALF HEX SHANK SLIM HEAD SERIES
	Same as NH-M series but with a minimized head profile. Allows near flush installations for special hole preparations such as countersink drilling or dimpling. Size from Metric4 to Metric10
NF-M TRUE METRIC FULL HEX SHANK & SLIM SERIES
	Similar to the NH-M series but with a full hex body. Provides higher torque-to-turn resistance when used in a hexagonal hole. Can be installed after finish. Size from Metric4 to Metric8
NF-M-L TRUE METRIC FULL HEX SHANK SLIM HEAD SERIES
	Same as NF-M series but with a minimized head profile. Allows near flush installations with no need for special hole preparations such as countersink drilling or dimpling. Size from Metric4 to Metric8

WCL offers an exceptionally broad line of metallic and plastic threaded fasteners, coupled with in-depth knowledge as to what fastener will work best in any given application. Recesses and drives, thread forms and screw points can be varied to provide optimum performance.